Laptop stuck on startup repair manual#

The most important item here is the вЂњerrorsвЂќ line. (Unfortunately the image which should have been shown here apparently isn't available from what ever host site was used.) The following image is the test results area: Be patient, or leave it running overnight. The running program will look something like this depending on the size and number of ram modules installed: You may need to change the boot order in the BIOS so that the DVD/CD-ROM the first device in the boot order to be able to boot from the CD you created. Once the CD is created, boot from it, and memtest will automatically start to run.ДЄ side note. Click on ImgBurn green arrow to start burning bootable memtest86 CD:ДЎ0. Locate memtest86+-.iso file, and click Open button.Д©. Open ImgBurn, and click on Write image file to discДЁ. Inside, you'll find memtest86+-.iso file.Д¦.

Unzip downloaded memtest86+-.iso.zip file.ДЈ. Download - Pre-Compiled Bootable ISO (.zip)Дў. If you have only one RAM stick installed.ДЎ. DO NOT proceed with memtest, if you can go with option AД«.

Laptop stuck on startup repair manual#

NOTE Keep in mind, the manual check listed above is always superior to the software check, listed below. If you have more than one RAM module installed, try starting computer with one RAM stick at a time. Other than that about all you can do is to run Memtest86 to check the RAM and the manufacturer's diagnostic tool for your hdd. The first thing to do, if you are comfortable in doing this, would be to check and see that the hdd and RAM is still properly seated. Usually after a hard knock like that the damage will be to hardware, not software like the operating system.